Product details
VooPoo PnP Replacement Coils is a VOOPOO replacement coil, heating element, or rebuildable coil accessory in the Coils & Atomizers category. VooPoo PnP Coils VooPoo PnP coils are press-fit mesh replacement coils for the D rag, Vinci, and older Argus kits. Eight resistance options from 0.15Ω through to 1.2Ω cover everything from tight MTL through to full DTL. These are the standard PnP coils, not the newer PnP-X range. The range splits into four series. VM (Vinci Mesh) handles DTL and RDL, TM (Thin Mesh) covers loose MTL, TR (Tight Resistance) gives you the tightest draw, and DW (Dual Wire) sits in the RDL crossover. All of them press-fit in the same way and come in packs of five. Key Features Eight Resistances 0.15Ω through 1.2Ω across MTL, RDL, and DTL Four Coil Series VM, TM, TR, and DW for different vaping styles Press-Fit Install no threading, push in and go Mesh Construction even heating across the coil surface 10W to 80W Range depending on resistance Wide Compatibility Drag X, Drag S, Vinci, Navi and more 5 Pack all resistances sold in packs of five VooPoo PnP Coils Difference This is the part most people search for. Each coil model has a different resistance, wattage range, and draw style. DTL Coils Coil Resistance Wattage E-Liquid PnP VM5 0.2Ω 60–80W High VG, max VG PnP VM6 0.15Ω 40–60W High VG, shortfills PnP VM1 0.3Ω 32–40W High VG shortfills RDL Coils Coil Resistance Wattage E-Liquid PnP VM4 0.6Ω 20–25W 50/50, high VG PnP DW60 0.6Ω 18–23W Nic salts, 50/50 MTL Coils Coil Resistance Wattage E-Liquid PnP TM2 0.8Ω 12–18W Nic salts, 50/50 PnP R2 1.0Ω 10–15W Nic salts, 50/50 PnP TR1 1.2Ω 10–15W Nic salts, high PG Two 0.6Ω options here. The VM4 is standard mesh with a slightly looser draw. The DW60 uses dual wire construction and runs a bit tighter. If you're using nic salts at the 0.6Ω level, the DW60 tends to suit better. The VM5 (0.2Ω) and VM6 (0.15Ω) are the cloud coils. Both need high VG e-liquid and a kit that can push 40W or more. The VM1 (0.3Ω) is the all-rounder for DTL at a lower wattage. For MTL, the TR1 (1.2Ω) is the tightest draw in the PnP range. Closest thing to a cigarette pull. The R2 (1.0Ω) and TM2 (0.8Ω) loosen up gradually from there. Compatible Kits Standard VooPoo PnP coils fit: VooPoo Drag X VooPoo Drag S VooPoo Vinci VooPoo Vinci X VooPoo Vinci Air VooPoo Navi VooPoo Find The Drag X2, S2, X3, and S3 take the newer VooPoo PnP-X coils with 4-layer leak protection and thermo-stable cotton. Standard PnP coils will not fit those kits. PnP Coil Specifications Spec Detail Coil Type Mesh (VM, TM, TR, DW series) Resistances 0.15Ω, 0.2Ω, 0.3Ω, 0.6Ω (x2), 0.8Ω, 1.0Ω, 1.2Ω Wattage Range 10W to 80W (varies by resistance) Installation Press-fit Pack Size 5 coils What's in the Box? 5x VooPoo PnP Coils (sold separately by resistance).
It is used when a compatible tank, pod, RBA, RTA, or RDA needs a fresh heating element or a matched rebuild part. Check the resistance, thread, and device family before installation, because coil heads and pre-built coils are not universal across every atomizer.
For ordering and internal matching, use catalog reference voopoo-pnp-309983 once you have confirmed the product name and compatibility details. Keep the packaging or page reference available when buying future replacement parts so the same model family can be identified without guessing. Prime and install coils according to the tank or device instructions, then replace them when flavor, resistance behavior, or vapor output changes noticeably. For VooPoo PnP Replacement Coils, match the exact model name before choosing a similar-looking alternative.
